NAVIGATION
• •   HOME
• •   About Us
• •  Capabilities
• •  Myths
• •  Project Portfolio 1
• •  Project Portfolio 2
• •  Project Portfolio 3
• •  Contact Us
• •  Links
• •  Privacy Policy

PRODUCTS
• •  Cables
• •  Air Terminals
• •  Bases
• •  Connectors
• •  Fasteners
• •  Catalogue PDFs
• •  Calculators

Loop Type Cable Fasteners

# 96 DS One-nail Copper Clip. For standard cables through 1/0. Made of 1/2" x 20 gauge strip copper. Weight: .01 lb. each.* # A83 One Nail Aluminum Clip. Made of 1/2" x 16 gauge aluminum strip. Weight: .006 lb. each.*
# 121A DS Copper Loop Fastener. Fits standard cables through 2/0. 5/8" wide with hole for 1/4" bolts. Weight: .02 lb. each.* # A121A DS Aluminum Loop Fastener. Weight: .01 lb. each.* # 121C Copper Loop Fastener. Fits 4/0 and larger cables. 5/8" wide with hole for 1/4" bolts. Weight: .04 lb. each.* # A121C Aluminum Loop Fastener. Weight: .01 lb. each.*

Paste Down Cable Fasteners

# 265X 3" Diameter Pressed Copper Paste Down Cable Fastener. With finger type cable fastener. Weight: .09 lb. each. (NO PICTURE AVAILABLE)

Cable Fasteners: Other Styles

FOR STANDING SEAM ROOFS # 121SS Copper Loop Type Fastener. Cable can run either parallel or perpendicular to seam. Fits cable through 2/0 or 1/2" diameter. Will slide over seams up to 3/4" wide. Weight: .18 lb. each. # A121SS Aluminum Loop Type Fastener. Weight: .14 lb. each.*
FOR SLATE ROOFS # 268 Copper Slate Roof Cable Connector. For horizontal or vertical cable. Adjustable length, slips under shingle and hooks around nail. Weight: .15 lb. each. # A268 Aluminum Slate Roof Cable Connector. Weight: .06 lb. each.
EAVES TROUGH # 8B Bronze Eaves Trough Bonding Connector. Provides good connection to rolled edge eaves troughs. This part is provided as tinned. Weight: .15 lb. each.* # A8B Aluminum Eaves Trough Bonding Connector. Part is not tinned. Weight: .05 lb. each.*

Nails, Screws, Bolts, Nuts

COPPER NAILS # 143 4 Penny. Approximate pieces per pound: 157 * # 144 6 Penny. Approximate pieces per pound: 134 *   4 Penny Nails — 1 1/2" Long. 6 Penny Nails — 2" Long
STAINLESS STEEL NAILS # 143L 4 Penny. Approximate pieces per pound: 233 * # 144L 6 Penny. Approximate pieces per pound: 179 *   4 Penny Nails — 1 1/2" Long. 6 Penny Nails — 2" Long
SHEET METAL OR WOOD SCREWS WITH PHILLIPS HEAD # 224 1" x No. 12 Screw. Approximate pieces per pound: 104 * # 225 1 1/2" x No. 12 Screw. Approximate pieces per pound: 76 *
SHEET METAL SCREWS # 125 Stainless Steel Tek Screw. Binder head, 3/4" long with Phillips head. Approximate pieces per pound: 174 *

Anchor Type Fasteners

# G64 Copper Loop Fastener with Lead Anchor. Complete with 1" length screw in anchor, 1" stainless steel wood screw and loop for stucco walls. For standard cables through 2/0. Weight: .046 lb. each.* # AG64 Aluminum Loop Fastener with Lead Anchor. Weight: .036 lb. each.*
# 123 Copper Loop Fastener with 1/4" Lead Anchors. Complete with anchor and 1/4" machine screw for standard cables through 2/0. Weight: .08 lb. each.* # A123 Aluminum Loop Fastener with 1/4" Lead Anchor. Weight: .07 lb. each.*
# 124 Copper Loop Fastener with 1/4" Expansion Anchor. With anchor and 1/4" machine screw for standard cables through 2/0. Weight: .06 lb. each.* # A124 Aluminum Loop Fastener with 1/4" Expansion Anchor. Weight: .05 lb. each.*
# 295 Lead Anchor. For 1/4" screws. 3/4" long, drill size 1/2". Weight: .04 lb. each.* # 295A Lead Anchor. For 5/16" screws. 1" long, drill size 5/8". Weight: .06 lb. each.* # 562 Lead Anchor. For 3/8" bolt. 1 1/4" long, drill size 3/4". Weight: .10 lb. each.*
# 295B Lead Wood Screw-In Anchor. 1" length for 1" wood screw, drill size 5/16". Weight: .02 lb. each.* # 295C Lead Wood Screw-In Anchor. 1 1/2" length for 1 1/2" wood screw. Drill size 5/16". Weight: .02 lb. each.*   Note: Use stainless steel wood screw # 224 or # 225 with above anchors.
# HD1412S Hammer Drive Anchor. Stainless steel drive nail anchor. 1/4" x 1 1/4". Weight: .02 lb. each.*

Ground Rod Clamps

STANDARD GROUND ROD CLAMP MADE OF COPPER BRONZE # 50 1/2" Clamp. Weight: .24 lb. each.* # 51 5/8" Clamp. Weight: .30 lb. each.* # 52 3/4" Clamp. Weight: .28 lb. each.*   Above clamps fit standard cable through 2/0 with corresponding size ground rod as indicated.
HEAVY DUTY GROUND ROD CLAMP MADE OF COPPER BRONZE # 50A 1/2" Clamp. Weight: .36 lb. each.* # 51A 5/8" Clamp. Weight: .42 lb. each.* # 52A 3/4" Clamp. Weight: .52 lb. each.*   Above clamps fit standard cable through 2/0 with corresponding size ground rod as indicated.
# 119 Bronze Clamp. For connecting 1/2" diameter cable to 1/2" diameter ground rod. Weight: .40 lb. each.* # A119 Same as above only in aluminum. Weight: .14 lb. each.* # 119A Bronze Clamp. For connecting 5/8" diameter cable to 5/8" diameter ground rod. Weight: .46 lb. each.* # A119A Aluminum Clamp. For cross-connecting two aluminum cables. Weight: .16 lb. each.*

Ground Floor Receptacles

# 310 Bronze Floor Ground Receptacle. Of heavy duty construction, with clamp type cable fastener for connecting one or two standard cables through 2/0 to ground rod. When ordering, please specify diameter and whether ground rod is threaded or plain. Weight: 2.72 lb. each.
# 311 Bronze Floor Ground Receptacle. Of heavy duty construction. Receptacle furnished for all size ground rods, 1/2" 5/8" and 3/4" either plain or threaded. When ordering, please specify diameter and whether ground rod is threaded or plain. Weight: 2.22 lb. each.

Ground Plates

# 586 Copper Bronze Ground Plate. 12" x 12" x 1/4" thick. Weight: 13.28 lb. each. # 586X Copper Bronze Ground Plate. 12" x 12" x 1/2" thick. Weight: 20.68 lb. each.
Copper Sheet Ground Plates   The following ground plates are made of 20 gauge copper sheet stock.   # 587. 18" x 36". Weight: 6.75 lb. each. # 587A. 36" x 36". Weight: 13.48 lb. each. # 588. 18" x 24". Weight: 4.60 lb. each.* # 589. 18" x 18". Weight: 3.125 lb. each.*

Ground Rods